Block programming
Your system, your logic.
A conventional controller makes you pick a layout from a numbered list. With Anolis, you connect blocks and get exactly the behaviour you want.
You make it do what you want.
44 blocks ready to connect
Sensors, temperature difference, thermostat, limits, clock, weekly scheduler, heating curve, mixing valve, modulating pump, anti-legionella, blocked pump detection.
12 templates to start from
Solar, heating, hot water: start from a proven template and adapt it to the installation.
Checked before sending
The program is checked in the app before it goes to the controller. The controller then runs it on its own, even without internet.
Reusable
Save your programs and reuse them from one job to the next.
Conventional controller or Anolis
You make it do what you want.
| — | Conventional controller | Anolis |
|---|---|---|
| Choosing how it works | One layout from a numbered list | Your layout, block by block |
| Setting up | Menus on a small screen, on site | Visual editor, from a computer |
| Changes | A site visit | Sent remotely in seconds |
| Special cases | Often impossible, or a second controller | Add the blocks you need |
| Internet outage | Not applicable | The program keeps running on the board |
What people program with it
What people program with it
- Two collector arrays, east and west, each with its own pump
- A wood boiler that only charges the buffer tank above 60 °C
- An anti-legionella cycle every Sunday at 3 am
- Electric backup allowed only during off-peak hours
- A pool heated only once domestic hot water is satisfied
FAQ
Frequently asked questions
Do I need to know how to code?
No. Blocks are connected with the mouse, like a diagram. The 12 templates cover common installations; you only change them when needed.
Can a bad program damage the installation?
The program is checked before sending, and protection blocks (overheating, limits, blocked pump) are always available. You can go back to the previous program at any time.
What happens if the connection drops?
Nothing. The program is stored and run by the controller. The internet is only used to change it and view readings.
Other Anolis Vision features
-
Alerts
You decide what to watch, and where the alert goes.
-
Reports and performance
You build the reports you want, including ADEME / SOCOL ones.
-
Monitoring and drift
You check whenever you want, and you see drift coming.
-
Sharing and access
You share with whoever you want, and each person sees what they should.