Anolis PRO
The controller that feeds Anolis Vision.
Four sensors, two flow inputs, three 230 V outputs, two 0–10 V outputs. For solar, for heating, and everything flowing in between.
Price and availability on quotation.
In numbers
- 4PT1000 sensors
- 2flow inputs
- 3230 V outputs
- 20–10 V outputs
Control runs on the board, not in the cloud. If the internet goes down, your heating keeps going, and the readings wait seven days to be collected.
Every terminal has a job.
Every terminal has a job.
Hover over the photo to see what each group of terminals is for.
- ●230 V supply, relay and boiler contact
- ●Indicators: power, network, alarm
- ●Wi-Fi and Bluetooth
- ●P1 · P2: variable-speed pumps
- ●A1 · A2: 0–10 V / PWM outputs
- ●S1 · S2: flow meters
- ●T1 to T4: PT1000 sensors
What it can do
What it can do
Speed control
Two phase-cut TRIAC outputs: the pump runs at the speed that is needed, no faster.
0–10 V and PWM
High-efficiency pumps, proportional mixing valves, boiler setpoint.
Energy meter
Pulse flow meter or Grundfos VFS sensor: every kilowatt-hour is counted.
Boiler contact
A low-voltage dry contact to call a boiler or heat pump for backup.
What it controls
- Solar water heater, 1 or 2 tanks
- East / west arrays, external heat exchanger
- Collective solar with ADEME monitoring
- 2-circuit heating, 0–10 V valves
- Wood boiler and buffer tank
- Hot water recirculation, controlled backup
Technical specifications
Technical specifications
Inputs
- Temperature sensors
- 4 × PT1000 (T1–T4)
- Resolution
- 0,1 °C
- Measuring range
- −30 … +250 °C
- Signal inputs
- 2 × S1/S2 — pulse meter or 0–5 V
- Flow sensors
- Grundfos VFS / RPS, pulse flow meters
Outputs
- TRIAC outputs
- 2 × TRIAC 230 V~ 1,5 A — phase-cut speed control
- Relay
- 1 × relay 230 V~ 10 A
- Boiler contact
- 1 × low-voltage dry contact 30 V / 1 A
- Analogue outputs
- 2 × 0–10 V / PWM 512 Hz
Connectivity
- Wi-Fi
- Wi-Fi 802.11 b/g/n
- Bluetooth
- Bluetooth 4.2 — on demand
- Ethernet
- plug-in module (coming soon)
- Security
- MQTT TLS 1.2 mTLS, signed firmware
- Offline
- 7 days of readings in memory
Power and mounting
- Power supply
- 110–240 V~ 50–60 Hz
- Fuse
- T4A
- Clock
- real-time, supercapacitor backup
- Mounting
- DIN rail
- Compliance
- CE, DEEE
Included with every box
- Access to Anolis Vision (Free plan)
- Remote firmware updates
- Commissioning from a phone, QR-code pairing
PDF datasheet: coming soon
FAQ
Frequently asked questions
Can Anolis PRO replace my current solar controller?
In most cases, yes. It uses PT1000 sensors, the market standard, and covers common layouts with its 12 templates. Send us your diagram and we will check compatibility.
What happens if the internet goes down?
Nothing changes for comfort. The program runs on the board. Readings are kept for up to 7 days and sent once the connection is back.
Do I need a subscription?
No. The Free plan of Anolis Vision includes live data, alarms and one year of history. Standard and Pro add long history, reports and fleet management.
Who can install it?
Any qualified heating engineer or electrician. Wiring follows the rules for a DIN-rail device; commissioning is done from a phone.
OEM versions
Need a different number of inputs, another enclosure or your own brand? We develop custom versions for manufacturers and distributors.